Gastroback 40123 Instrucciones de uso descargar pdf (Pagina 10)

Assembling your Design Juicer

Operating your Design Juicer

WARNING: Make sure the appliance is

completely assembled and that there are nor

foreign objects in the feed chute before putting

the plug into the power point.

Never put fingers, wooden spoons or other

foreign substances (such as hair, clothing, brushes,

cloth) into the feed chute.

Always turn the appliance off and wait for the

motor to stop moving before removing the lid of

the juicer.

Slide the food pusher all the way down the feed

chute (picture 5a).

Step 6:

Place the pulp container into position by tilting

the motor base slightly to the right. Insert the

container under the juicer cover on the left-hand

side ensuring it is supported by the container

support extending from under the motor base

(picture 6).

NOTE: To minimise cleaning, line the pulp container

with a plastic freezer bag to collect the pulp. Pulp can

then be used in other dishes, or as compost for the

garden or discarded.

Step 7:

Place the juice jug underneith the spout (picture 7).

Keep the working place clean and dry. Do not

let any liquids or water run into the motor block.

Do not put any cloth or napkins underneath

the appliance to avoid endangering by fire and

voltage. In case that water or other liquids ran

into the motor block while operating turn off the

appliance immediately, pull the plug and dry

the appliance with a clean cloth. Operate

according to the instructions ´Trouble shooting

guide`

40123_Manual_Englisch.qxp 04.09.2008 11:21 Seite 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sin comentarios

Gastroback 40123 Instrucciones de uso Pagina 10